The PPS System revolutionizes the way push poles are used.
Previously, fishermen were limited in what tips could be used, mostly restricted to hard and abrasive nylon tips. In addition to this, you needed to dedicate an entire push pole to a single tip, due to the difficulty in replacing the tip.
Not anymore!
With our patent pending PPS system, fishermen now have the choice of using a variety of different push pole tips depending on the environment that they are in. From the push pole tips we currently make, to an ever-increasing catalog of push pole tips and accessories for a variety of needs.
The system uses high-precision CNC-machined parts to ensure a tight fit up between the receiver and your choice of push pole tip.
Installing and using the PPS system is easy, simply use a standard 2-part epoxy, such as PC-11, and install the receiver on your push pole.
This can be done the same way that a conventional push pole tip would be installed.
Once the epoxy has cured, simply screw in your preferred push pole tip, and that’s it!
Now, you are no longer limited in using a single push pole tip for any given day, take your push pole tips with you, and swap them out as the bottom / wind and current conditions change around you.
An added benefit is that the interface creates a good mounting point for a trailering flag. Whether you have experienced any law enforcement activity regarding this law or not, it is not a bad idea to be covered. Simply unscrew your tip, slide the flag loop onto your tip, then screw it in hand-tight, and you will be covered legally assuming you buy our flag or make your own that meets the guidelines! This makes the flag a no-brainer and you won't have to worry about it slipping off.
